ENGINE AND BILGE MAINTENANCE
A.Z.48
STORAGE PROTECTION FOR OUT-BOARD ENGINES
Gives optimum storage protection for outboard motors. Protects outboard motors against corrosion and oxidation, resulting from the aggressive saline atmosphere, Having hydrophobic characteristics, repels the humidity responsible for oxidation and corrosion. Deposits a non-brittle protective film on the surface. Aerosol 150 ml.
REF. 650 MA
BACTOFOR
POWERFUL EUCALYPTUS-BASED WATER PURIFIER
Powerful eucalyptus-based purifier wicht neutralises bacterial proliferation in water holds. It is a bactericide conforming to AFNOR standard 72150. Elimintaes nauseous odours. Manufactured from ingredients chosen for their biodegradability and their compatibility with the environment. Dilute 2 to 6 cups in 5 litres of water. Pour the mixing in the water of hold. Let act.
REF. 438 M
D.05/11
BILGE AND ENGINE CONCENTRATED CLEANER AQUAEOUS BASED
European standards. Emulsifying solvent for security. Biodegradable > 99 % - high ignition point. For elimination of mineral oils both crud and refined. No corrosive - no caustic - no toxic Use pur or diluted. Can of 1L and 5L.
REF. 628 M
N.D.M.2
ENGINE DEGREASER AQUAEOUS-BASED
European standards. Removes dirt, grease, oil on all engines. Can be used on metal, painted surfaces, rubber. Manufactured from ingredients chosen for their biodegradability and their compatibility with the environment. No corrosive - no toxic. Just spray on. Let act a few seconds and rinse. Aerosol 300 ml
REF. 917 M
D.K.L. 4
THERMAL NON COROSIVE DESCALER WITH BUILT-IN INDICATOR
Provides total descaling in complete safety of all calcerous deposits in heat exchangers, condensors, evaporators and refrigeration circuits. Does not affect ferrous and metals. Can be used in complete safety, it does not give off any corrosive or noxious vapour. Dosage : 3% to 55°C, 10% to 10°C and >10% to freezing. Can of 1 litre and 5 litres.
REF. 662 M
A.G.C.
SPECIAL ANTI-SLIDE FOR DRIVE-BELTS
Increase the adherence of the drive belts and eliminate ice-skating on rubber, leather and fabric. Improve the output of the drive belt up to 50%. Spray on the interior of the drive-belt.
Réf. 987M - Aérosol 150ml
ALCO "6"
ALUMINIUM MARINE PAINT FOR ENGINES PROTECTION
Mono-component paint with quick drying. Allows a quick and durable protection. Resists to the bad weather and to saline atmosphere. The temperature resistant is 600°C. Can be used as a primer.
REF. 243M - Aerosol 150ML
STORE ENGINE OIL
STORAGE OIL FOR ENGINES
STORE ENGINE OIL lubricates and protects internal engine components during storage. STORE ENGINE OIL prevents rust and corrosion when storing inboard or outboard engines is for an extended period of time. STORE ENGINE OIL is used as follows : Remove the air filter. Spray 15 to 20 seconds into the air intake while making turn the engine until it stops. Aerosol of 150 ml
Réf. 106 M
D.G. 28
LEAK DETECTOR
Is a safety product enabling the detection of gas or compressed air leaks from pipe-work, taps, air tanks, etc. Is non-flammable. Is packaged in a 150-ml. aerosol. is sprayed directly onto the part to be checked. Leaks will be shown up by the formation of bubbles.
Réf. 991M - Aérosol 150ml
ALTOGEL
ANTI-FREEZE PROTECTION
Gives complete antifreeze protection as a result of its physical characteristics: 100% active material. Comes in the form of a clear liquid, with no particular odour, miscible with water in all proportions. Is non-irritant for the skin. Has an anti-foaming regulator. Is a stable product, which retains its effectiveness even at high temperature.
Réf. 985 M - 1 litre - Réf. 985M.5 - 5 litres
C.B. 14
CARBURETTOR CLEANER WITHOUT DISASSEMBLY
Specially formulated preparation to replace chlorinated halogen solvents and petroleum aromatic solvents creating risks for users and the environment. Is a colourless and odourless cleaner. Has high solvent power making it possible to rapidly dissolve and detach gum, dust, oil and varnish deposits. Dries completely.
Réf. 981 M
NO SEL
CLEANING COOLANT CICUITS FOR ENGINES
It is a solubilizing of salt with strong dampening capacity which contains total inhibitor of corrosion. Makes it possible to avoid the aluminium chloride formation during the wintering thanks to its strong dampening capacity. Biodegradable product. Can of 1 litre and 5 litres.
REF. 941 M
DEMARTOP
STARTING FLUID FOR ENGINES
Product ready to use. Packed in bomb usable in all positions. Allows to obtain in a few seconds the starting in mode of use of the engine.
REF. 956 M
SORB-OIL
OIL AND FUEL ABSORBENT SHEETS
Special absorbent material soaks up oil and fuel but repels water. One sheet allows to absorb 1,5 litres of fuel and oil. Great for bilge areas, engine rooms or anywhere oil or fuel are spilled. Helps to protect the environment.
Réf. 141 M Lot de 3 feuilles
P.F.C
WHITE PAINT FOR BILGE
White paint specially designed for engine room. Resists to high temperature. Coverage : 5 to 10 m2 / kilo.
Réf. 120M - Pot1 kilo
N.C. 27
ENGINE CLEANER READY TO USE
Engine cleaner ready to use. Conforms to european standards. Removes dirt, grease and oil. Can be used on metal, painted surfaces, rubber. Manufactured from ingredients chosen for their biodegradability and their compatibility with the environment. No corrosive and no toxic. Just spray on. Let act a few minutes. Wipe with a damp sponge.
Ref. 175M - Spray 500 ml
MATT' REPAR
REPAIR SYSTEM OF URGENCY FOR DRAINS, CONNECTIONS, PIPES...
Strong bande made of fibres and polyurethane intended for the fast repair of cracks and escapes on the pipes, drains and connections. Adhere on the majority of materials: plexyglas, PVC, steel, copper, stainless, aluminium… Resist pressures from 15 to 35 bars. High strength to high temperature (150°C). Bande ready to use. Soak it in water during 20 seconds. Apply to the crack. Starting of polymerization after 7mn and whole polymerization after 30 mn.
Ref. 182M - Bande de 51mm x 1820mm
COUSSIN ABSORBANT
SUPER ABSORBER OIL AND FUEL
The discharge of oil and fuel which flow in the engine holds is prohibited. Indeed, oil and fuel form a compact and persistent layer which floats on the surface. The "cushion" absorber MATT CHEM makes it possible to avoid these accidental discharges and thus to respect the balance of fauna and the flora. One absorber allows to absorb 4 to 5 litres of fuel and oil. The absorber is hydrophobic (it does not absorb water). Once all the oil or fuel has been absorbed, the absorber must be put back in a plastic bag and disposed of in an appropriate container such as device for recovering oil.
REF. 235M
KIT HIVERNAGE
This kit allows to the yachtman to have all the necessary for the storage of the engine
This kit contains : - A protective oil for the external parts of the engine A.Z.48 (aerosol 150 ml) - A protective oil for internal parts of the engine STORE ENGINE OIL (aerosol 150ml) - A dehumidifier for electrical and electronic equipment HYDREX (aerosol 150 ml) - A sheet allowing to absorb 1,5 litres of oil and fuel, SORB OIL.
REF. 242MK
BIO-CLEAN MOTOR
CONCENTRATED ECOLOGICAL DEGREASER FOR ENGINE
Concentrated ecological degreaser based on a combination of vegetable bases, surfactants of vegetable origin selected for their propensity to biodegrade and their easily renewable origin, alkaline salts and authorised foodstuff colorant (directive 76/768/EEC). Allows a quick degreasing thanks to its strong power of penetration of the greasy deposits, dirty oil… Safe for paints, light alloys and plastic. Recommended dilution is 50ml to 5 litres of water
Bidon / Bottle 500 ml - Ref. 273M
Gamme plaisance formulée et fabriquée en laboratoire de qualité ISO 9001
Un numéro vert est à votre disposition pour tout renseignement : 0800.12.20.30

En
Fr
Nl
Help
Contacts
Search
Back.
The catalogue