ANTI-CORROSION WHITE PAINT

Anti-corrosion paint of white color. Neutralizes rust and prevents a new formation of rust. Time of drying except dust: 2 hours - dryness in 4 hours and hard in 20 hours.

REF. 916 M - Pot 250ml

DOC_-_CORUST_B.pdf

FDS_-_CORUST_B.pdf

SOLVENT GLUE FOR COCKPIT CEILINGS

Specially designed glue for sticking cockpit ceilings. Formulated in a solvent phase. Does not dry immediatly. Open time: 15 to 30 minutes according to temperature, substrate porosity and quantity of glue applied. Before use the glue, always shake the aerosol. Spray at 25 to 30 centimetres from the surface. Aerosol 300 ml

Aérosol 300 ml Réf. 923 M

DOC_-_GUM_U.pdf

FDS_-_GUM_U.pdf

AQUAEOUS GLUE FOR COCKPIT CEILINGS

Specially designed glue for sticking cockpit ceilings. Only formulated in the aqueous phase, it is solvent free and odourless. Permanent adhesion, allowing the glued covering to be subject to washing or intensive use: 48 hours approx.

Réf. 976M - Pot 1 kilo

DOC_-_AQUAKOL.pdf

FDS_-_AQUAKOL.pdf

SEALANT FOR CAULKING DECK M.S. POLYMERE BASED (BLACK)

Sealant M.S. Polymer based free from solvent, isocyanate and silicone. Ready to use and does not require the application of a primer. Keeps its flexibility even after drying and hardening what limits the risks of crack. Rich in additives of adhesiveness what enables it to adhere even on wet surfaces. Can be used for the caulking of teak decks as it is very resistant to U.V. and weathering. Can be sandpapered and painted.

Ref. 174M - Cartouche 400 grs

DOC_-_MATT_FLEX.pdf

FDS_-_MATT_FLEX.pdf

ADHESIVE-SEALANT M.S. POLYMERE BASED (WHITE)

Sealant M.S. Polymer based free from solvent, isocyanate and silicone. Flexible, resistant and polymerizing very quickly in contact with the moisture of the air. After drying, it keeps its flexibility. Exceptional resistance to climatic conditions, U.V and very high temperatures. Can apply to every supports such light alloys, aluminium, stainless, glass, gelcoat, PVC…

Ref. 173M - Cartouche 400 grs

DOC_-_MPA_B.pdf

FDS_-_MPA_B.pdf

GELCOAT PAINT

White paint that is specially formulated for use on fibreglass (epoxy resin, gelcoat and polyester resin). Quick and easy application saves you time and effort. Fast drying. Good coverage. Not flaked off with time and respects the support's quality namely its texture and its aspect. Resists to ultraviolet rays. It is used as follows : First of all, clean the support to be treated in order to remove stains, dust. Remove non-adherent parts of paint. Let dry and mask the parts to be protected. Shake the aerosol. Pass a first layer of paint while spraying to 20/25 centimetres of the support by sweeping surface regularly. Do it again 2 times : Work in cross layers i.e. the first spray in the horizontal direction. Wait for few minutes that this layer is dry and carry out the second layer in the vertical direction. Treated surface is dry into 20 minutes at a temperature of 20°C. To make this task successful, keep the distance between the support and the tube of the aerosol that is about 20/25 centimetres. Especially, do not forget to clean the tube of the aerosol head in bottom at the end of work. Coverage : 2m2. Colours : White Pur - Cream - Signal White

REF. 185M Aerosol 150ml / REF. 187M Aerosol 150ml / REF. 252M Aerosol 150ml

DOC_-_GELCOAT_RETOUCH.pdf

FDS_-_GELCOAT_RETOUCH\'.pdf

GELCOAT PEINTURE RETOUCHE

WHITE COATING ACRYLIC BASED FOR ANTI-SKID

Brings back original colour to anti-skid. Very good resistance to U.V. and do not flake off with time. Very high quality and hardness, exceptional impact and abrasion resistance. Resistant to washing with detergent Apply on a clean and dry surface.

Réf. 198M - Pot 1kg

COLOURLESS PROTECTOR FOR WATER LINE

Colourless protector specially designed for the water line. Avoids grapples of algae and oily stains. Improves the displacement of teh boat and its velocity. Reduces the consumption of motor fuel. Apply it on a dry and clean surface.

Réf. 198M - Aérosol 500 ml

ELASTIC GLUE FOR ANY KIND REPAIRS

Specially designed for the jointing or reparing materials of different distension coefficient. Allows to repair holds, cracks on any kind of supports such as fender, inflatable boat, boat-cover.

Réf. 205M - Tube 115 grs

DOC_-_MATT_FIX.pdf

FDS_-_MATT_FIX.pdf

ADHESIVE-SEALANT M.S. POLYMERE BASED (COLOURLESS)

Sealant M.S. Polymer based free from solvent, isocyanate and silicone. Flexible, resistant and polymerizing very quickly in contact with the moisture of the air. After drying, it keeps its flexibility. Exceptional resistance to climatic conditions, U.V and very high temperatures. Can apply to every supports such light alloys, alum

REF. 241M - Cartouche 400 grs

DOC_-_MPA_\"I\".pdf

FDS_-_MPA_I.pdf

ADHESIVE-SEALANT M.S. POLYMERE BASED (GREY)

Sealant M.S. Polymer based free from solvent, isocyanate and silicone. Flexible, resistant and polymerizing very quickly in contact with the moisture of the air. After drying, it keeps its flexibility. Exceptional resistance to climatic conditions, U.V and very high temperatures.

REF. 259M - Cartouche 400 grs

DOC_-_MPA_\\\\\\\\\\\\\\\"G\\\\\\\\\\\\\\\".pdf

FDS_-_M.P.A_\\\\\\\"G\\\\\\\".pdf

PU SEALANT STABILIZER SILICONE BASED

PU sealant stabilizer silicone based with temperatures operational limit from -56°C to +300°C. Is colourless. Leaves a water-repellent protective film on PU sealant and stops the sticking effect of the sealant. Is used pure.

Flacon / Bottle 100 ml - Ref. 267M

COLOURLESS DOUBLE-SIDED TAPE INSTANT BONDING

H.P.C. is a colourless double-sided tape for instant and permanent bonding. H.P.C is a proven alternative to screws, rivets, welds and other forms of mechanical fasteners. H.P.C can be applied on any king of surface such as glass, plexiglas, plastic, gelcoat, metal .... Instructions of use : The application's temperature is between +15°C et +30°C. H.P.C must be applied on a cleaned and dry surface free from dust and grease. Pressure sensitivie adhesive must be applied with a maximum of pressure in order to achieve maximum pressure level. The indicated level of performance will be reached after a bonding period of 24 hours at 23°C. Tape of 10M (Width 19mm - Thickness 0,5 mm)

REF. 282M